YH7011 Multifunction Signal Loop Process Calibrator Meter With Multimeter

Signal Loop Process Calibrator Meter With Multimeter Procee Calibrator + Multimeter function DC mA/ mV/ V frequent output            YH7011 Portable Multifunction Signal Loop Process Calibrator Meter With Multimeter  This series of process calibrator multimeter is designed with exact current, voltage calibrator function and digital multimeter function, it is used for detecting and debugging automatic control equipment in industry scene.Features:1. 30V overload protection for two output terminals.

2. Auto range.

3. Overload protection within full range.

4. The max allowable voltage between the measuring terminal and the ground: 1000V DC or AC (RMS)

5. Operation elevation: max 2000m

6. Display: LCD, can switch between output and measured data showing.

7. Max displayed value: 3999 number.

8. Time for auto power off: 15 minutes.

9. Operating source: 1.2V×4 AA battery pack with capacity

10. Operating temperature: -10°C ~ 40°C

11. Batteries : Ni – MH  rechargeable  batteries

12. Batterary life: 50 hours typical (measurement), 12 hours typical (sourcing 12 mA)

13. Warranty: 1 year

  

Portable Multifunction Signal Loop Process Calibrator Meter With Multimeter 

Specifications
		YH7010	YH7011
Loop Calibrator	DC Current	0-22 mA± (0.1% + 5digit)	0-22 mA± (0.1% + 5digit)
	DC Voltage	0~100mV, 0~1V ± (0.1% + 5dgt)	0~100mV, 0~1V ± (0.1% + 5dgt)
	Frequency	10.00Hz~10.00kHz±5digit	10.00Hz~10.00kHz±5digit
Multimeter	DCV	0~1000V	0~1000V
	ACV	0~700V	0~700V
	DC mA	0~400mA	0~400mA
	ACmA	0~400mA	0~400mA
	Resistance	0~40MΩ	0~40MΩ
	Capacitance	0~200.0µF	0~200.0µF
	Frequency	0~5.000MHz	0~5.000MHz
	Continuity	√	√
	Diode	√	√
	HFE	√	√
	Temperature	√	√
Display(LCD)		Primary Display	Primary and Secondary Display
Independently power(24v 30mA)		√	√
Auto Range		√	√
Battery		Ni-Mh (include charger)	Ni-Mh (include charger)

YH7011 Multifunction Signal Loop Process Calibrator Meter With Multimeter